Quick Fix Synthetic Urine Instructions

quick fix plus 6.1Quick Fix Plus 6.1 synthetic urine definitely works, but you must use it correctly to see positive results. It’s like a golfer: Just because he owns the best clubs in the world doesn’t mean that he will be the best golfer.

The same thing foes for Quick Fix fake piss: You need to use it properly. We will review the instructions, as well as frequently asked questions. Using Quick Fix can be nerveracking and it’s important to do it the right way.

Click here to learn why Quick Fix synthetic urine is our top choice.

How To Properly Use Quick Fix

Note: we assume you are using the fake urine in accordance of all local, state, and Federal laws. For this article, we will assume you are using to test yourself in the comforts of your own home.

Make sure to follow the instructions as closely as possible. Many think they know how to use and end making mistakes like these ones.

1 – The first thing we want to do is make sure the fake piss is at the right temperature. If you’re not sure why that’s important, check out our full article here.

2 – In order to keep the Quick Plus 6.1 at the right temperature, you must open the container and place it in the microwave.

Only microwave for 10 minutes! You do not want to overheat the fake pee.

Note: if you don’t have access to a mircrowave then we recommend using a heating pad. QuickFixSynthetic.com sells the exact ones needed to get your fake pee to the right temperature. You can also find the heating pads at your local drug store.

If you decide to go the heating pad route then make sure that the Quick Fix fake pee receives it for at least 60 minutes. The heating pads take longer than the microwave.

3 – After your sample has been heated, it’s time to shake the synthetic urine. After shaking, be sure to look at you temperature gauge (on the bottle). It should show that the sample is between 94 and 100 degrees (the temperature that will pass).

4 – If you notice the sample is below 94 degrees then make sure you microwave it for a few more seconds. Be sure to test the temperature again, and always stay on the conservative side when picking the number of seconds in the microwave.

5 – If you find the sample above the 100 degree mark, allow if some time to cool off.

6 – Now it’s time to keep your sample at the correct temperature before it gets tested. We recommend using a rubber band to strap the heating pad to it. The heating pad should safely keep the sample at the correct for at least 4-5 hours (should be plenty of time to reach your final destination).

Note: We recommend you have the taped sample in your pocket. That’s the best way to keet the fake urine at the correct temperature.

7 – When it’s time to test yourself, take one last look at the temperature gauge. Before removing the contents for the test, the sample must read between 94 and 100 degrees. If the sample is below the temperature and you’re in the pressure situation, your best bet is to put in back against your body.

8 – Pour the contents into your at-home testing kit.

That’s it! If you followed the instructions, your test will show a passing result.

Another cool thing about Quick Fix synthetic urine is that the sample can be heated multiple times. Just because the temperature drops below—even to room temperature—you are still fine to use it later on.

Video Overview of Quick Fix

Have you tried using it before? Let us know how it went!

Back to the main page.

Facebooktwittergoogle_plusredditpinterestlinkedinmail